• Twin Heads Vacuum Shaping Machine

Product Feature

  • The middle frame film width be adjusted by electrical adjustment and also can be adjusted finely.
  • The cold water moulding& upper moulding are adopted electrical elevating which can be assured the operator safety and the moulding can be reached ideal position quickly and reduced the replacing time.
  • Auto water spraying and adopted the reciprocating movement spraying water which will equaled for every position and not accumulated water meanwhile.
  • The auto draw film is adopted three powerful responding clamping kit, stable & rapid of machinery running and the ill-products will be reduced mostly.
  • The film drawing motor is controlled by inverter, furthermore, the forward, backward & speed reducing etc., be adjusted separatively, stable & rapid of actions, Since, the production rate will be increased.
  • The electrical heating box is controlled by inverter motor and the stable operating process will not effected due to unstable air pressure and the positioning operating can be adjusted by electrical photo-eye, Especially, those will not vibrated after positioning.
  • The feeding is adopted motor drived rubber roller unloading and the unloading length can be adjusted. (Can be installed the sillcon tunnel for dipping silicon cement)
  • This m/c are suitable for PVC, PS, PP, PET, ABS, OPS etc., thermoplastic material.
  • The heat forming is adopted sealing style and anyhow material, thickness film in heating process, those will not generated sinking condition, Especially, those film will not happened stretching appearances and the surface of forming products will be bright & glossy.
  • After the film be heated and the film will be pluck up by hot air, before unforming, even as more higher top end of convex moulding contacted the film ahead and appeared film cooling forming but not generated uneven thickness appearances.
  • This machine have 2 unwinder independent feeding device, can produce 2 kinds of products at same time. easy for production line arrangment.
  • Machine control by touch screen controlleror control panel of control box.

Product Specification

Model Forming Area Film Width Forming Depth Vacuum Pump Air Compressor Electric Heater
FAST-6012 570x1200 mm 500~600 mm 140 mm 7.5 HP 10 HP 36 kw
FAST-7012 670x1200 mm 500~700 mm 140 mm 7.5 HP 10 HP 38 kw
FAST-7014 670x1400 mm 500~700 mm 140 mm 7.5 HP 10 HP 40 kw
FAST-7016 670x1600 mm 500~700 mm 140 mm 7.5 HP 10 HP 42 kw
FAST-8012 770x1200 mm 500~800 mm 140 mm 7.5 HP 10 HP 46 kw
FAST-8014 770x1400 mm 500~800 mm 140 mm 7.5 HP 10 HP 48 kw
FAST-8016 770x1600 mm 500~800 mm 140 mm 7.5 HP 10 HP 50 kw

※We reserve the right to modify the specifications, if there are subjected to change, without prior notice.
※Machine made available on request.